Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

BARSET, cont.
Intermec Fingerprint v8.70.0/v10.0.0 Programmer´s Reference Manual
Chapter —Program Instructions
#5 Bar Code Height:
The height parameter corresponds to the BARHEIGHT statement. In QR
Code, this parameter is used to specify model (1 or 2).
Default value: 100 dots
#6-#11 Bar code specific parameters:
These parameters have different meanings for each bar code or are used
only as placeholders. Refer to the descriptions of the various 2-dimensional
and composite bar codes in Chapter 5 for complete syntax descriptions
and programming examples.
Example This example shows how a BARSET statement is used to specify a Code
39 bar code (compare for example with the example for BARTYPE stmt):
10 PRPOS 30,400
20 DIR 1
30 ALIGN 7
40 BARSET "CODE39",2,1,3,120
50 BARFONT "Swiss 721 BT",10,8,5,1,1 ON
60 PRBAR "ABC"
70 PRINTFEED