Programmer's Reference Manual Intermec Fingerprint® v8.70.0 ...

Chapter —Program Instructions
CUT
Purpose Statement activating an optional cutter.
Syntax CUT
Remarks Obviously, this statement only works with printers fitted with a cutter. A
cutter is normally used to cut non-adhesive paper strip or to cut through
the liner between self-adhesive labels.
When a PRINTFEED statement is executed, the printer feeds out a certain
amount of the media according to the printer’s setup in regard of startadjust
and stopadjust, as explained in its User’s Guide . Then the cutter
can be activated by a CUT statement.
Example This program orders the printer to print a text and then cut off the media:
10 PRPOS 250,250
20 DIR 1
30 ALIGN 4
40 FONT "Swiss 721 BT"
50 PRTXT "Hello everybody!"
60 PRINTFEED
70 CUT
RUN
Intermec Fingerprint v8.70.0/v10.0.0 Programmer´s Reference Manual