1. Introduction - Firenze University Press

[5] Erdil E, Ilkan M, Egelioglu F. An experimental study on energy generation with a
photovoltaic (PV)– solar thermal hybrid system. Energy 2008; 33: 1241– 1245.
[6] Mawire A, McPherson M, van den Heetkamp RRJ. Simulated energy and exergy analyses of
the charging of an oil–pebble bed thermal energy storage system for a solar cooker. Solar
Energy Materials & Solar Cells 2008; 92: 1668–1676.
[7] Kemp IC, Deakin AW. The Cascade Analysis for Energy and Process Integration of Batch
Processes, Part 1: Calculation of Energy Targets. Chem Eng & D 1989; 67: 495-509.
[8] Klemeš J, Linnhoff B, Kotjabasakis E, Zhelev TK, Gremouti I, Kaliventzeff B, et al. Design
and Operation of Energy Efficient Batch Processes, EC Project EURO BATCH Final Report,
EC Brussels; 1994.
[9] Zhao XG, O’Neill BK, Roach JR, Wood RM, Heat integration for batch processes Part 1:
Process Scheduling Based on Cascade Analysis. Trans IChemE 1998; 76: 685 – 699.
[10] Zhao XG, O’Neill BK, Roach JR, Wood RM. Heat integration for batch processes Part 2:
Heat Exchanger Network Design. Trans IChemE 1998; 76: 700 – 710.
[11] Adonyi R, Romero J, Puigjaner L, Friedler F. Incorporating heat integration in batch process
scheduling. Applied Thermal Engineering 2003; 23: 1743–1762.
[12] Pourali O, Amidpour M, Rashtchian D., Time decomposition in batch process integration,
Chemical Engineering and Processing 2006; 45: 14 – 21.
[13] Majozi T. Minimization of energy use in multipurpose batch plants using heat storage: an
aspect of cleaner production. Journal of Cleaner Production, 2009; 17: 945 – 950.
[14] Foo DCY, Chew YH, Lee CT. Minimum units targeting and network evolution for batch heat
exchanger network, Applied Thermal Engineering, 2008; 28: 2089-2099.
[15] Varbanov P, Klemeš J. 2010, Total Sites Integrating Renewables with Extended Heat Transfer
and Recovery. Heat Transfer Engineering, 31(9), 733-741.
[16] Friedler F. Process integration, modelling and optimisation for energy saving and pollution
reduction, Chemical Engineering Transactions 2009; 18: 1-26.
[17] Friedler F. Process integration, modelling and optimisation for energy saving and pollution
reduction. Applied Thermal Engineering 2010; 30: 2270-2280.
[18] Muster-Slawitsch B, Weiss W, Schnitzer H, Brunner C. The green brewery concept e Energy
efficiency and the use of renewable energy sources in breweries. Applied Thermal
Engineering 2011, 31, 2123-2134.
[19] Ludig S, Haller M, Schmid E, Bauer N. Fluctuating renewables in a long-term climate change
mitigation strategy. Energy 2011, 36 (11) 6674-6685
[20] European Commission, [Accessed: 23/08/2011].
[21] Xi C, Hongxing Y, Lin L, Jinggang W, Liu W. Experimental studies on a ground coupled
heat pump with solar thermal collectors for space heating. Energy 2011; 36: 5292 – 5300.
[22] Atkins MJ, Walmsley MRW, Morrison AS. Integration of solar thermal for improved energy
efficiency in low-temperature-pinch industrial processes. Energy2010; 35: 1867 – 1873.
[23] Townsend DW, Linnhoff B. Heat and power networks in process design. Part II: Design
procedure for equipment selection and process matching. AIChE Journal 1983; 29(5): 748-
771.
[24] Linnhoff B, Townsend DW, Boland D., Hewitt GF, Thomas BEA, Guy AR, Marsland RH. A
user guide on process integration for the efficient use of energy. IChemE, Rugby UK;1982,
last edition 1994.
[25] Klemeš J, Dhole VR, Raissi K, Perry SJ, Puigjaner L. Targeting and Design Methodology for
Reduction of Fuel, Power and CO2 on Total Sites. Appl Therm Eng 1997; 17: 993 – 1003.
312