Bid #01-1112 Library and Reprographics Roofing ... - Citrus College

More documents

Recommendations

Info

PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. Deviations: In the event this Specification deviates from the manufacturer's current specification, this specification prevails, except where they conflict with the manufacturer's requirements for the specified guarantee. In this case, the manufacturer's specification prevails. B. Specification Amendments: Drawings, addenda and modifications may be issued subsequent to the printing of this Specification. C. Contractor Acceptance: Prior to the project start, ascertain that all aspects of this Specification and possible modifications are workable and do not conflict with the manufacturer's requirements for the specified guarantee. Upon commencement of the work, it will be presumed that this Specification and drawings, addenda and modifications are satisfactory to both the Contractor and the manufacturer in their entirety. D. Supplied Materials: Supply all materials of the roofing system, including accessory products. The bidding Contractor, by making his bid, represents that his bid price is based on the use of the materials listed in Part 2 Products. Refer to Part 1.03 Description of Work for specific use within each roofing assembly outlined. 1.02 REFERENCE STANDARDS References in these specifications to standards, test methods, and codes, are implied to mean the latest edition of each such standard adopted. The following is an abbreviated list of associations, institutions, and societies which may be used as references throughout this specification section. ASTM American Society for Testing and Materials Philadelphia, PA FM Factory Mutual Engineering and Research Norwood, MA NRCA National Roofing Contractors Association Rosemont, IL OSHA Occupational Safety and Health Administrations Washington, DC SMACNA Sheet Metal and Air Conditioning Contractors National Association Chantilly, VA UL Underwriters Laboratories Northbrook, IL 1.03 DESCRIPTION OF WORK The basic work descriptions (components, layering and attachment methods) required in this specification are referenced below. M-13-135 page - 2 Citrus Library Roofing Specification
Library – Lower Roof Area Project Type: Tear-off Specification #: 20S30 ISA-T Deck: Metal Slope: Less than 1/8 inch Tapered Insulation: Tapered polyisocyanurate system, providing for a roof slope of 1/4 inch, mechanically attached simultaneously with the top layer of insulation. Insulation - top layer: DensDeck Prime by Georgia-Pacific, having a thickness of 1/4 inch, mechanically attached. Roof system: Paradiene 20 TS SA, adhered to the DensDeck Prime surface; Paradiene 30 CR FR TG, torch applied. Flashing system: Veral Aluminum, torch applied. Library – Mechanical Well Project Type: Tear-off Specification #: 24PPR-IT Deck: Metal Slope: Less than 1/8 inch Insulation – bottom layer: Polyisocyanurate system, having a thickness of 3 inches, mechanically attached simultaneously with the top layer of insulation. Insulation - top layer: DensDeck Prime by Georgia-Pacific, having a thickness of 1/4 inch, mechanically attached. Roof system: Paradiene 20 TG P, torch applied; Parapro Roof Membrane System. Flashing system: Parapro 123 Flashing System. Flashing system: Veral Aluminum, torch applied. RELATED WORK A. Furnish and install C-Port pipe/conduit supports by Cooper B-Line, Inc. at a minimum 8 feet o.c. Install the specified walktread material under pipe/conduit supports, extending a minimum of 2 inches beyond the support unit. B. Furnish and install tapered perlite crickets behind curbed units. Loose lay the tapered perlite panels and overlay with the mechanically attached DensDeck Prime panels. C. Paint all exposed pipe flashings/supports, stacks and fans using a non-fibrated aluminum coating. D. Furnish the specified walktread material and install from roof access points to mechanical units and around the perimeter of each unit. M-13-135 page - 3 Citrus Library Roofing Specification
Page 1 and 2:
Bid #01-1112 Library and Reprograph
Page 3 and 4:
NOTICE TO CONTRACTORS CALLING FOR B
Page 5 and 6:
Preparation and Submittal of Bid Pr
Page 7 and 8:
District's Right to Modify Contract
Page 9 and 10:
Job-Walk Proposals must be held ope
Page 11 and 12:
documents submitted in response to
Page 13 and 14:
Purchasing Office located at 1000 W
Page 15 and 16:
acknowledges that the District may,
Page 17 and 18:
SUBCONTRACTORS LIST Bidder: _______
Page 19 and 20:
___________________________________
Page 21 and 22:
5.1.2 Are there any judgments, orde
Page 23 and 24:
Executed this ________ day of _____
Page 25 and 26:
IN WITNESS WHEREOF, the Principal a
Page 27 and 28:
AGREEMENT THIS AGREEMENT is made th
Page 29 and 30:
LABOR AND MATERIAL PAYMENT BOND KNO
Page 31 and 32:
PERFORMANCE BOND KNOW ALL MEN BY TH
Page 33 and 34:
CERTIFICATE OF WORKERS' COMPENSATIO
Page 35 and 36:
5. Contractor and I acknowledge tha
Page 37 and 38:
The undersigned individual executin
Page 39 and 40:
6.1 Workers' Compensation Insurance
Page 41 and 42:
GENERAL CONDITIONS ARTICLE 1: DEFIN
Page 43 and 44:
equipment or workmanship forming a
Page 45 and 46:
3.1.4 Verification of Applications
Page 47 and 48:
actual or potential impact of any s
Page 49 and 50:
coordination of the Work and compon
Page 51 and 52:
superintendent shall represent the
Page 53 and 54:
Contract Time or the Contract Price
Page 55 and 56:
4.10 Safety limitation, orders for
Page 57 and 58:
4.11.5 Compliance with Proposition
Page 59 and 60:
4.21.2 Payment of Prevailing Rates.
Page 61 and 62:
eight (8) hours in any calendar day
Page 63 and 64:
that such person hold a valid contr
Page 65 and 66:
performed, whether such operations
Page 67 and 68:
6.8 Indemnity. Unless arising solel
Page 69 and 70:
7.3.1 Submittal of Preliminary Cons
Page 71 and 72:
hereinabove. The District's electio
Page 73 and 74:
or Final Completion, the Work is ac
Page 75 and 76:
Payment pursuant to the preceding s
Page 77 and 78: following, the submittal of which a
Page 79 and 80: (xxi) Failure to properly pay preva
Page 81 and 82: failure, for any reason, to give wr
Page 83 and 84: shall constitute full compensation
Page 85 and 86: with the performance of such item o
Page 87 and 88: tests, inspections or approvals rev
Page 89 and 90: of the Contractor under the Contrac
Page 91 and 92: 15.1.7 Conversion to Termination fo
Page 93 and 94: SPECIAL CONDITIONS 1. Application o
Page 95 and 96: REQUEST FOR SUBSTITUTION FORM Failu
Page 97 and 98: CERTIFICATION OF EQUAL PERFORMANCE
Page 99 and 100: W-9 Form (Rev. October 2007) Depart
Page 101 and 102: Form W-9 (Rev. 10-2007) Generally,
Page 103 and 104: Citrus College Citrus Community Col
Page 105 and 106: Roofing Specification For: Citrus C
Page 107 and 108: The basic work descriptions (compon
Page 109 and 110: 7. Duct systems shall not be pressu
Page 111 and 112: 1. Letter from the proposed primary
Page 113 and 114: 3. Limited Access: Prevent access b
Page 115 and 116: 2. Self-Adhesive Modified Bitumen F
Page 117 and 118: 1. Insulation Fasteners: Insulation
Page 119 and 120: metal edge fascia with 1 foot secti
Page 121 and 122: fastening should be provided at all
Page 123 and 124: ase ply surface and up the primed w
Page 125 and 126: C. Lead Pipe Flashings: Completely
Page 127: Roofing Specification For: Citrus C
Page 131 and 132: 6. All penetrations into ducts shal
Page 133 and 134: All submittals which do not conform
Page 135 and 136: designated crew member shall watch
Page 137 and 138: Paradiene 20 TG P, by Siplast; Irvi
Page 139 and 140: 1. Insulation Fasteners: Insulation
Page 141 and 142: Fabricate metal edge/fascia in maxi
Page 143 and 144: ASTM A 792. Steel decks should be s
Page 145 and 146: een applied to the top of the cant,
Page 147 and 148: (1) foot in either direction from t
show all

Bid #01-1112 Library and Reprographics Roofing ... - Citrus College

Create successful ePaper yourself

Delete template?

Save as template?