Bid #01-1112 Library and Reprographics Roofing ... - Citrus College
Bid #01-1112 Library and Reprographics Roofing ... - Citrus College
Bid #01-1112 Library and Reprographics Roofing ... - Citrus College
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Siplast PA-917 LS Primer by Siplast; Irving, TX<br />
2. Primer for Self-Adhesive Flashing Reinforcing Sheets: A quick drying, low-VOC,<br />
water-based, high-tack primer specifically designed to promote adhesion of roofing <strong>and</strong><br />
waterproofing sheets to approved substrates. Primer shall meet South Coast Air Quality<br />
District <strong>and</strong> Ozone Transport Commission requirements.<br />
> Siplast TA-119 Primer by Siplast; Irving, TX<br />
3. Mastics: An asphalt cutback mastic, reinforced with non-asbestos fibers, used as a<br />
base for setting metal flanges conforming to ASTM D 4586 Type II requirements.<br />
> Siplast PA-1021 Plastic Cement by Siplast; Irving, TX<br />
B. PMMA Primers<br />
1. Primer for Vertical Concrete <strong>and</strong> Masonry Substrates: A fast-curing PMMA-based<br />
primer for use in vertical applications over concrete, concrete repair materials <strong>and</strong><br />
masonry substrates.<br />
> Pro Primer W by Siplast; Irving, TX<br />
2. Primer for Wood, Plywood <strong>and</strong> Rigid Insulation Substrates: A fast-curing PMMAbased<br />
primer for use in over wood, plywood <strong>and</strong> rigid insulation substrates.<br />
> Pro Primer W by Siplast; Irving, TX<br />
C. Sealant: A moisture-curing, non-slump elastomeric sealant designed for roofing<br />
applications. The sealant shall be approved by the roof membrane manufacturer for use in<br />
conjunction with the roof membrane materials. Acceptable types are as follows:<br />
> Siplast PS-304 Elastomeric Sealant by Siplast; Irving, TX<br />
D. Synthetic Chips: Synthetic chips to match the factory applied reflective surfacing of the<br />
finish ply.<br />
E. Resin Accessories<br />
1. Cleaning Solution/Solvent: A clear solvent used to clean <strong>and</strong> prepare transition areas<br />
of in-place catalyzed resin to receive subsequent coats of resin <strong>and</strong> to clean substrate<br />
materials to receive resin.<br />
> Pro Prep by Siplast; Irving, TX<br />
2. Preparation Paste: A PMMA based paste used for remediation of depressions in<br />
substrate surfaces or other irregularities.<br />
> Pro Paste Resin by Siplast; Irving, TX<br />
F. Perlite Cant Strips: A cant strip composed of exp<strong>and</strong>ed volcanic minerals combined with<br />
waterproofing binders. The top surface shall be pre-treated with an asphalt based coating.<br />
The face of the cant shall have a nominal 4 inch dimension.<br />
G. Fasteners<br />
M-13-135 page - 12 <strong>Citrus</strong> <strong>Library</strong> <strong>Roofing</strong> Specification