Product Manual
Product Manual
Product Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
From and To Select ports to be initialized.<br />
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch<br />
Port A read-only field indicating a port on the Switch.<br />
MAC Address The MAC address of the Switch connected to the corresponding port, if any.<br />
Auth PAE State The Authenticator PAE State will display one of the following: Initialize, Disconnected,<br />
Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth,<br />
ForceUnauth, and N/A.<br />
Backend State The Backend Authentication State will display one of the following: Request,<br />
Response, Success, Fail, Timeout, Idle, Initialize, and N/A.<br />
Port Status The status of the controlled port can be Authorized, Unauthorized, or N/A.<br />
Initializing Ports for MAC Based 802.1x<br />
To initialize ports for the MAC side of 802.1x, the user must first enable 802.1x by MAC address in<br />
the Advanced Settings window. Click Configuration > Port Access Entity > PAE System Control<br />
> Initialize Port(s) to open the following window:<br />
Figure 6- 77. Initialize Port(s) window (MAC based 802.1x)<br />
To initialize ports, first choose the switch in the switch stack by using the Unit pull-down menu, then<br />
the range of ports in the From and To field. Then the user must specify the MAC address to be<br />
initialized by entering it into the MAC Address field and checking the corresponding check box. To<br />
begin the initialization, click Apply.<br />
NOTE: The user must first globally enable 802.1X in the Switch<br />
Information (Advanced Settings) window in the Configuration<br />
folder before initializing ports. Information in the Initialize Ports Table<br />
cannot be viewed before enabling 802.1X.<br />
Reauthenticate Port(s) for Port Based 802.1x<br />
This window allows you to reauthenticate a port or group of ports by choosing a port or group of ports<br />
by using the pull down menus From and To and clicking Apply. The Reauthenticate Port Table<br />
displays the current status of the reauthenticated port(s) once you have clicked Apply.<br />
Click Configuration > Port Access Entity > PAE System Control > Reauthenticate Port(s) to<br />
open the Reauthenticate Port(s) window:<br />
109