Product Manual

DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Multiple Image Services
The Multiple Image Services folder allows users of the xStack family of switches to configure and
view information regarding firmware located on the Switch. The Switch allows two firmware images
to be stored in its memory and either can be configured to be the boot up firmware for the Switch. For
information regarding firmware images located on the Switch, open the Firmware Information link.
The default setting for the Switch’s firmware will have the boot up firmware stored in Image 1, but the
user may set either firmware stored to be the boot up firmware by using the Config Firmware Image
window.
Firmware Information
The following screen allows the user to view information about current firmware images stored on the
Switch. To access the following screen, click Maintenance > MULTIPLE IMAGE Services >
Firmware Information.
Figure 9- 5. Firmware Information window
This window holds the following information:
Parameter Description
BOX States the stacking ID number of the switch in the switch stack.
ID States the image ID number of the firmware in the Switch’s memory. The Switch can
store 2 firmware images for use. Image ID 1 will be the default boot up firmware for
the Switch unless otherwise configured by the user.
Version States the firmware version.
Size States the size of the corresponding firmware, in bytes.
Update Time States the specific time the firmware version was downloaded to the Switch.
177