Product Manual

DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Click the OK button to continue. Once the Switch configuration settings have been saved to NV-
RAM, they become the default settings for the Switch. These settings will be used every time the
Switch is rebooted.
Reset
The Reset function has several options when resetting the Switch. Some of the current configuration
parameters can be retained while resetting all other configuration parameters to their factory defaults.
NOTE: Only the Reset System option will enter the factory default parameters
into the Switch's non-volatile RAM, and then restart the Switch. All other options
enter the factory defaults into the current configuration, but do not save this
configuration. Reset System will return the Switch's configuration to the state it
was when it left the factory
Reset gives the option of retaining the Switch's User Accounts and History Log while resetting all
other configuration parameters to their factory defaults. If the Switch is reset using this window, and
Save Changes is not executed, the Switch will return to the last saved configuration when rebooted.
Figure 9- 10. Reset window
Reset System
In addition, the Reset System option is added to reset all configuration parameters to their factory
defaults, save these parameters to the Switch's non-volatile RAM, and then restart the Switch. This
option is equivalent to Reset Config followed by Save Changes.
Figure 9- 11. Reset System window
Reset Config
The Reset Config option will reset all of the Switch's configuration parameters to their factory
defaults, without saving these default values to the Switch's non-volatile RAM. If the Switch is reset
with this option enabled, and Save Changes is not executed, the Switch will return to the last saved
configuration when rebooted.
180