Product Manual

Parameter Description
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Server IP Enter the IP address of the server from which you wish to download firmware.
File Name Specify the path and filename of the firmware on the Server.
Type Specify the purpose of the firmware:
Download: Clicking this radio button will specify a download to the Switch. This will be
the firmware that the Switch will immediately use.
Update: Clicking this radio button will save the firmware to the Switch's memory but
not configure the Switch for this firmware. The Switch may hold two firmware versions
specified as Section 1 and Section 2.
Information about firmware on the Switch can be viewed in the Firmware Management table in the
same window. It holds the following information:
Parameter Description
ID The user-defined Section ID of the firmware on the Switch.
Boot Status The firmware that is currently being run on the Switch will be identified in this field with
the term "Boot".
Version The runtime version of the firmware.
Size The size of the firmware, in bytes.
Date The date that the firmware was added to the Switch.
From The IP address of the Server from which the firmware came.
User The name of the user who downloaded the firmware.
Set Boot Click the Apply button in this field to set the firmware version to be used upon the
next boot up of the Switch.
Delete Click the X in this column to permanently delete the corresponding firmware from the
Switch.
Download Configuration File
To download a settings file from a TFTP server, click on the TFTP Service folder in the Maintenance
folder and then the Download Configuration File link:
Figure 9- 2. Download Settings from TFTP Server window
175