Product Manual

More documents

Recommendations

Info

DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch NOTE: For the circuit ID sub-option of a standalone switch, the module field is always zero. Circuit ID sub-option format : 1. 2. 3. 4. 5. 6. 7. 1 6 0 4 VLAN Module Port 1 byte 1 byte 1 byte 1 byte 2 bytes 1 byte 1 byte a. Sub-option type b. Length c. Circuit ID type d. Length e. VLAN : the incoming VLAN ID of DHCP client packet. f. Module : For a standalone switch, the Module is always 0; For a stackable switch, the Module is the Unit ID. g. Port : The incoming port number of DHCP client packet, port number starts from 1. Remote ID sub-option format : 1. 2. 3. 4. 5. 2 8 0 6 MAC address 1 byte 1 byte 1 byte 1 byte 6 bytes 1. Sub-option type 2. Length 3. Remote ID type 4. Length 5. MAC address: The Switch’s system MAC address. Figure 6- 87. Circuit ID and Remote ID Sub-option Format DHCP/BOOTP Relay Interface Settings The DHCP/ BOOTP Relay Interface Settings allow the user to set up a server, by IP address, for relaying DHCP/ BOOTP information to the Switch. The user may enter a previously configured IP interface on the Switch that will be connected directly to the DHCP/BOOTP server using the following window. Properly configured settings will be displayed in the BOOTP Relay Table at the bottom of the following window, once the user clicks the Add button under the Apply heading. The user may add up to four server IPs per IP interface on the Switch. Entries may be deleted by clicking it’s corresponding . To enable and configure DHCP/BOOTP Relay Global Settings on the Switch, click Configuration > Layer 3 Networking > DHCP/BOOTP Relay > DHCP/BOOTP Relay Interface Settings: 119
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch Figure 6- 88. DHCP/BOOTP Relay Interface Settings and DHCP/BOOTP Relay Interface Table window The following parameters may be configured or viewed. Parameter Description Interface The IP interface on the Switch that will be connected directly to the Server. Server IP Enter the IP address of the DHCP/BOOTP server. Up to four server IPs can be configured per IP Interface 120
Page 1 and 2:
D-Link DES-3526/DES-3526DC Managed
Page 3 and 4:
Table of Contents Preface..........
Page 5 and 6:
QoS................................
Page 7 and 8:
Download Configuration File .......
Page 9 and 10:
DES-3526 / DES-3526DC Fast Ethernet
Page 11 and 12:
Page 13 and 14:
Introduction Gigabit Ethernet Techn
Page 15 and 16:
Page 17 and 18:
LED Indicators DES-3526 / DES-3526D
Page 19 and 20:
Page 21 and 22:
Installation Package Contents Befor
Page 23 and 24:
Page 25 and 26:
Connecting The Switch DES-3526 / DE
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Password Protection DES-3526 / DES-
Page 33 and 34:
MIBs DES-3526 / DES-3526DC Fast Eth
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
DHCP Manual Subnet Mask Default Gat
Page 43 and 44:
MAC Address Aging Time DES-3526 / D
Page 45 and 46:
Page 47 and 48:
To configure a mirror port: DES-352
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
MAC Notification Port Settings DES-
Page 55 and 56:
Page 57 and 58:
The following parameters can be set
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Parameter Description DES-3526 / DE
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Multicast Port Filtering Mode DES-3
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82: GVRP Setting DES-3526 / DES-3526DC
Page 83 and 84: DES-3526 / DES-3526DC Fast Ethernet
Page 93 and 94: The following parameters can be set
Page 97 and 98: from GMT in +/- HH:MM DES-3526 / DE
Page 113 and 114: Authenticator DES-3526 / DES-3526DC
Page 115 and 116: 802.1X Client 802.1X Client DES-352
Page 123 and 124: This window displays the following
Page 131: DHCP Agent Information Option 82 Ch
Page 143 and 144: Parameter Description DES-3526 / DE
Page 145 and 146: Local Enable Password DES-3526 / DE
Page 151 and 152: SSH Algorithm DES-3526 / DES-3526DC
Page 155 and 156: Traps DES-3526 / DES-3526DC Fast Et
Page 157 and 158: The following parameters can set: P
Page 163 and 164: The following parameters can set: P
Page 165 and 166: The following field can be set: Par
Page 169 and 170: UMB Cast (RX) DES-3526 / DES-3526DC
Page 175 and 176: The following fields may be set or
Page 177 and 178: Parameter Description DES-3526 / DE
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Maintenance TFTP Services Switch Hi
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Commander Switch Icon DES-3526 / DE
Page 205 and 206:
Candidate Switch Icon DES-3526 / DE
Page 207 and 208:
Group DES-3526 / DES-3526DC Fast Et
Page 209 and 210:
Page 211 and 212:
Cables and Connectors DES-3526 / DE
Page 213 and 214:
Glossary DES-3526 / DES-3526DC Fast
Page 215 and 216:
Page 217 and 218:
This limited warranty provided by D
Page 219 and 220:
Trademarks: D-Link is a registered
Page 221 and 222:
D-Link Europe Limited Product Warra
Page 223 and 224:
D-Link Europe Limited Produktgarant
Page 225 and 226:
D-Link Europe a limité la garantie
Page 227 and 228:
Garantía limitada del producto D-L
Page 229 and 230:
D-Link Europe Termini di Garanzia d
Page 231 and 232:
Technical Support You can find soft
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Technical Support You can find upda
Page 239 and 240:
Asistencia Técnica D-Link Latin Am
Page 241 and 242:
友冠技術支援台灣地區用
Page 243 and 244:
Page 245 and 246:
Assistance technique Vous trouverez
Page 247 and 248:
Supporto tecnico Gli ultimi aggiorn
Page 249 and 250:
Pomoc techniczna Najnowsze wersje o
Page 251 and 252:
Technikai Támogatás Meghajtó pro
Page 253 and 254:
Teknisk Support Du finder software
Page 255 and 256:
技术支持办公地址:北京市
Page 257:
Registration Card (All Countries an
show all

Product Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?