Product Manual

More documents

Recommendations

Info

DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch 2. Member Switch (MS) - This is a switch that has joined a single IP group and is accessible from the CS, and it takes on the following characteristics: • It is not a CS or MS of another IP group. • It is connected to the CS through the CS management VLAN. 3. Candidate Switch(CaS) - This is a switch that is ready to join a SIM group but is not yet a member of the SIM group. The Candidate Switch may join the SIM group through an automatic function of the DES-3526, or by manually configuring it to be a MS of a SIM group. A switch configured as a CaS is not a member of a SIM group and will take on the following characteristics: • It is not a CS or MS of another Single IP group. • It is connected to the CS through the CS management VLAN The following rules also apply to the above roles: • Each device begins in a Commander state. • CS's must change their role to CaS and then to MS, to become a MS of a SIM group. Thus the CS cannot directly be converted to a MS. • The user can manually configure a CS to become a CaS. A MS can become a CaS by: • Being configured as a CaS through the CS. • If report packets from the CS to the MS time out. • The user can manually configure a CaS to become a CS • The CaS can be configured through the CS to become a MS. After configuring one switch to operate as the CS of a SIM group, additional DES-3526 switches may join the group either by an automatic method or by manually configuring the Switch to be a MS. The CS will then serve as the in band entry point for access to the MS. The CS's IP address will become the path to all MS's of the group and the CS's Administrator's password, and/or authentication will control access to all MS's of the SIM group. With SIM enabled, the applications in the CS will redirect the packet instead of executing the packets. The applications will decode the packet from the administrator, modify some data, and then send it to the MS. After execution, the CS may receive a response packet from the MS, which it will encode and send it back to the administrator. When a CS becomes a MS, it automatically becomes a member of the first SNMP community (include read/write and read only) to which the CS belongs. However, if a MS has its own IP address, it can belong to SNMP communities to which other switches in the group, including the CS, do not belong. SIM Using The Web Interface All DES-3526 switches are set as Candidate (CaS) switches, as their factory default configuration and Single IP Management will be disabled. To enable SIM for the Switch using the Web interface, go to the Single IP Management folder and click the SIM Settings link, revealing the following window. 183
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch Figure 10- 1. SIM Settings window (disabled) Change the SIM State to Enabled using the pull-down menu and click Apply. The window will then refresh and the SIM Settings window will look like this: The following parameters can be set: Parameters Description Figure 10- 2. SIM Settings window (enabled) SIM State Use the pull-down menu to either enable or disable the SIM state on the Switch. Disabled will render all SIM functions on the Switch inoperable. Role State Use the pull-down menu to change the SIM role of the Switch. The two choices are: Candidate - A Candidate Switch (CaS) is not the member of a SIM group but is connected to a Commander Switch. This is the default setting for the SIM role of the DES-3526. Commander - Choosing this parameter will make the Switch a Commander Switch (CS). The user may join other switches to this Switch, over Ethernet, to be part of its SIM group. Choosing this option will also enable the Switch to be configured for SIM. Discovery Interval The user may set the discovery protocol interval, in seconds that the Switch will send out discovery packets. Returning information to a Commander Switch will include information about other switches connected to it. (Ex. MS, CaS). The user may set the Discovery Interval from 30 to 90 seconds. Holdtime This parameter may be set for the time, in seconds; the Switch will hold information sent to it from other switches, utilizing the Discovery Interval. The user may set the hold time from 100 to 255 seconds. Click Apply to implement the settings changed. After enabling the Switch to be a Commander Switch (CS), the Single IP Management folder will then contain three added links to aid the user in configuring SIM through the web, including Topology, Firmware Upgrade and Configuration Backup/Restore. Topology The Topology window will be used to configure and manage the Switch within the SIM group and requires Java script to function properly on your computer. The following message should appear the first time the user clicks the Topology link in the Single IP Management folder. 184
Page 1 and 2:
D-Link DES-3526/DES-3526DC Managed
Page 3 and 4:
Table of Contents Preface..........
Page 5 and 6:
QoS................................
Page 7 and 8:
Download Configuration File .......
Page 9 and 10:
DES-3526 / DES-3526DC Fast Ethernet
Page 11 and 12:
Page 13 and 14:
Introduction Gigabit Ethernet Techn
Page 15 and 16:
Page 17 and 18:
LED Indicators DES-3526 / DES-3526D
Page 19 and 20:
Page 21 and 22:
Installation Package Contents Befor
Page 23 and 24:
Page 25 and 26:
Connecting The Switch DES-3526 / DE
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Password Protection DES-3526 / DES-
Page 33 and 34:
MIBs DES-3526 / DES-3526DC Fast Eth
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
DHCP Manual Subnet Mask Default Gat
Page 43 and 44:
MAC Address Aging Time DES-3526 / D
Page 45 and 46:
Page 47 and 48:
To configure a mirror port: DES-352
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
MAC Notification Port Settings DES-
Page 55 and 56:
Page 57 and 58:
The following parameters can be set
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Parameter Description DES-3526 / DE
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Multicast Port Filtering Mode DES-3
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
GVRP Setting DES-3526 / DES-3526DC
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
The following parameters can be set
Page 95 and 96:
Page 97 and 98:
from GMT in +/- HH:MM DES-3526 / DE
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Authenticator DES-3526 / DES-3526DC
Page 115 and 116:
802.1X Client 802.1X Client DES-352
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
This window displays the following
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
DHCP Agent Information Option 82 Ch
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Parameter Description DES-3526 / DE
Page 145 and 146: Local Enable Password DES-3526 / DE
Page 147 and 148: DES-3526 / DES-3526DC Fast Ethernet
Page 151 and 152: SSH Algorithm DES-3526 / DES-3526DC
Page 155 and 156: Traps DES-3526 / DES-3526DC Fast Et
Page 157 and 158: The following parameters can set: P
Page 163 and 164: The following parameters can set: P
Page 165 and 166: The following field can be set: Par
Page 169 and 170: UMB Cast (RX) DES-3526 / DES-3526DC
Page 175 and 176: The following fields may be set or
Page 177 and 178: Parameter Description DES-3526 / DE
Page 187 and 188: Maintenance TFTP Services Switch Hi
Page 195: DES-3526 / DES-3526DC Fast Ethernet
Page 203 and 204: Commander Switch Icon DES-3526 / DE
Page 205 and 206: Candidate Switch Icon DES-3526 / DE
Page 207 and 208: Group DES-3526 / DES-3526DC Fast Et
Page 211 and 212: Cables and Connectors DES-3526 / DE
Page 213 and 214: Glossary DES-3526 / DES-3526DC Fast
Page 217 and 218: This limited warranty provided by D
Page 219 and 220: Trademarks: D-Link is a registered
Page 221 and 222: D-Link Europe Limited Product Warra
Page 223 and 224: D-Link Europe Limited Produktgarant
Page 225 and 226: D-Link Europe a limité la garantie
Page 227 and 228: Garantía limitada del producto D-L
Page 229 and 230: D-Link Europe Termini di Garanzia d
Page 231 and 232: Technical Support You can find soft
Page 237 and 238: Technical Support You can find upda
Page 239 and 240: Asistencia Técnica D-Link Latin Am
Page 241 and 242: 友冠技術支援台灣地區用
Page 245 and 246: Assistance technique Vous trouverez
Page 247 and 248:
Supporto tecnico Gli ultimi aggiorn
Page 249 and 250:
Pomoc techniczna Najnowsze wersje o
Page 251 and 252:
Technikai Támogatás Meghajtó pro
Page 253 and 254:
Teknisk Support Du finder software
Page 255 and 256:
技术支持办公地址:北京市
Page 257:
Registration Card (All Countries an
show all

Product Manual

Create successful ePaper yourself

Delete template?

Save as template?