Product Manual

The following parameters are displayed:
Parameter Description
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Figure 7- 27. SNMP User Table Display window
User Name An alphanumeric string of up to 32 characters. This is used to identify the SNMP
users.
Group Name This name is used to specify the SNMP group created can request SNMP messages.
SNMP Version V1 - Indicates that SNMP version 1 is in use.
V2 - Indicates that SNMP version 2 is in use.
V3 - Indicates that SNMP version 3 is in use.
Auth-Protocol None - Indicates that no authorization protocol is in use.
MD5 - Indicates that the HMAC-MD5-96 authentication level will be used.
SHA - Indicates that the HMAC-SHA authentication protocol will be used.
Priv-Protocol None - Indicates that no authorization protocol is in use.
DES - Indicates that DES 56-bit encryption is in use based on the CBC-DES (DES-
56) standard.
To return to the SNMP User Table, click the Show All SNMP User Table Entries link.
To add a new entry to the SNMP User Table Configuration window, click on the Add button on the
SNMP User Table window. This will open the SNMP User Table Configuration window, as
shown below.
143