Product Manual

DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Figure 6- 1. Switch Information (Basic Settings) window
The Switch Information (Basic Settings) window shows the Switch's MAC Address (assigned by the
factory and unchangeable), the Boot PROM, Firmware Version, and Hardware Version. This
information is helpful to keep track of PROM and firmware updates and to obtain the Switch's MAC
address for entry into another network device's address table, if necessary. The user may also enter a
System Name, System Location and System Contact to aid in defining the Switch, to the user's preference.
IP Address
The IP Address may initially be set using the console interface prior to connecting to it through the
Ethernet. If the Switch IP address has not yet been changed, read the introduction of the DES-3526
Command Line Interface Manual or return to Section 4 of this manual for more information.
To change IP settings using the web manager you must access the IP Address menu located in the
Configuration folder.
To configure the Switch's IP address:
Open the Configuration folder and click the IP Address menu link. The web manager will display
the Switch's current IP settings in the IP configuration menu, as seen below.
26