Product Manual

GVRP Setting
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
In the Configuration menu, open the VLANs folder and click GVRP Setting.
The 802.1Q Port Settings window, shown below, allows you to determine whether the Switch will
share its VLAN configuration information with other GARP VLAN Registration Protocol (GVRP)
enabled switches. In addition, Ingress Checking can be used to limit traffic by filtering incoming
packets whose PVID does not match the PVID of the port. Results can be seen in the table under the
configuration settings, as seen below.
The following fields can be set:
Parameter Description
Figure 6- 39. 802.1Q Port Settings window
From/To These two fields allow you to specify the range of ports that will be included in the
Port-based VLAN that you are creating using the 802.1Q Port Settings window.
68