Product Manual

DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Figure 7- 32. SNMP Group Table Configuration window
To add a new entry to the Switch's SNMP Group Table, click the Add button in the upper left-hand
corner of the SNMP Group Table window. This will open the SNMP Group Table Configuration
window, as shown below.
Figure 7- 33. SNMP Group Table Configuration window
The following parameters can set:
Parameter Description
Group Name Type an alphanumeric string of up to 32 characters. This is used to identify the new
SNMP group of SNMP users.
Read View Name This name is used to specify the SNMP group created can request SNMP messages.
Write View Name Specify a SNMP group name for users that are allowed SNMP write privileges to
the Switch's SNMP agent.
Notify View Name Specify a SNMP group name for users that can receive SNMP trap messages
generated by the Switch's SNMP agent.
147