30.07.2013 Views

Product Manual

Product Manual

Product Manual

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Connecting The Switch<br />

DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch<br />

Switch To End Node<br />

Switch To Hub or Switch<br />

Connecting To Network Backbone or Server<br />

Switch To End Node<br />

12<br />

Section 3<br />

NOTE: All 24 high-performance NWay Ethernet ports can<br />

support both MDI-II and MDI-X connections.<br />

End nodes include PCs outfitted with a 10, 100 or 1000 Mbps RJ?45 Ethernet/Fast Ethernet Network<br />

Interface Card (NIC) and most routers.<br />

An end node can be connected to the Switch via a twisted-pair Category 3, 4, or 5 UTP/STP cable.<br />

The end node should be connected to any of the ports of the Switch.<br />

Figure 3- 1. Switch connected to an end node<br />

The Link/Act LEDs for each UTP port will light green or amber when the link is valid. A blinking<br />

LED indicates packet activity on that port.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!