Trend Micro InterScan Gateway Security Appliance M-Series ...

Outbreak Defense
spyware. InterScan Gateway Security Appliance then lists the client in the Cleaned
computers section of the Summary screen.
You can find the Damage Cleanup Services (DCS) Online Scan at the following
URL:
https://{The appliance IP}/nonprotect/cgi-bin/dcs_manual_cleanup.cgi
In the URL above, replace The appliance IP with the IP address of your appliance.
Potential Threat
A potential threat is any client that has malware or spyware on their computer. As
such, they pose a threat to the security of your network.
If InterScan Gateway Security Appliance detects that a client has malware or
spyware, it will deploy Damage Cleanup Services on the client's machine.
To configure the Damage Cleanup Setting:
1. From the left-side menu click Outbreak Defense > Damage Cleanup.
2. Select the Enable Damage Cleanup check box.
3. Optional - Add non-Windows-based clients to the Damage Cleanup Exception
List by typing their IP address or the IP address range and clicking Add.
InterScan Gateway Security Appliance will not deploy Damage Cleanup to
clients with IP addresses that are on the Damage Cleanup Exception List.
4. Click Save.
Note: Damage Cleanup Services only works if the HTTP, SMTP, and FTP protocols and
their anti-spyware features are enabled.
Configuring Settings
Configure Outbreak Prevention Policy (OPP) Automatic Deployment and OPP download
options (Setting tab). InterScan Gateway Security Appliance sends out a message
whenever a new OPP becomes available or an old OPP expires (Notification
tab).
9-7