Trend Micro InterScan Gateway Security Appliance M-Series ...

Trend Micro InterScan Gateway Security Appliance M-Series Administrator’s Guide
LED Indicators
The LCD Module has five light-emitting diodes (LEDs) that indicate the POWER, UID,
SYSTEM, HARD DISK, and OUTBREAK status, as shown in the figure below.
The Back Panel
The back panel of InterScan Gateway Security Appliance contains a power
receptacle, power switch, USB ports, serial connection, fan vent, and LAN ports.
1-12
TABLE 1-3. Possible behavior for each LED indicator
LED
Name
Icon State Description
POWER Yellow, steady The appliance is operating normally
Off (no color) The appliance is off
UID Blue, steady The UID LED lights up when the UID
button is pressed
Off (no color) The UID LED is not illuminated (default
is off)
System Red, flashing The appliance is booting
Red, steady Power-On Self-Test (POST) error
Yellow, flashing The appliance OS and applications are
booting
Yellow, steady The appliance program file (firmware)
encountered a critical error
Green, steady The appliance program file (firmware) is
ready
Hard Disk Green, steady The appliance hard disk is operating
normally
Red, steady Hard disk has failed and the appliance
is operating in diskless mode
Outbreak Green, steady Outbreak Prevention Services (OPS) is
disabled
Red, flashing OPS is enabled