Trend Micro InterScan Gateway Security Appliance M-Series ...

To update the device image through the Web console:
Administrative Functions
1. Obtain the new firmware file in one of two ways:
• Download the latest firmware from the InterScan Gateway Security
Appliance section of the Trend Micro Update Center:
http://www.trendmicro.com/download/product.asp?productid=73
• Insert the InterScan Gateway Security Appliance Solutions Disc containing
the new firmware into your CD-ROM drive.
2. Click Administration > Firmware Update. The Firmware Update screen
appears.
3. Click Browse. A navigation window opens.
4. Locate and click the new image file. It will have a file name similar to:
phoenix_image.1.1.1073.en_US.R. The file name of the new
firmware appears in the Browse field.
5. Click Update Firmware. A countdown screen appears and counts down from 3
minutes while the appliance is updating its firmware. When the appliance has
rebooted, the Web console login screen appears.
Note: This firmware update method enables updating to a new program file while
keeping current configuration. For other firmware update alternatives, see
Updating the Device Image Using the AFFU on page 15-4.
IP Address Settings
InterScan Gateway Security Appliance uses the IP address and host name when communicating
with other computers or servers and when checking for component and
firmware updates. Anti-spam, content filtering, and URL filtering are dependent on
the settings in this screen.
InterScan Gateway Security Appliance uses the IP address when checking for
component and firmware updates. On this screen you can choose either:
• Dynamic IP address (DHCP)
• Static IP address
13-11