Trend Micro InterScan Gateway Security Appliance M-Series ...

Administrative Functions
4. Enter a value for the Network ID - The network address.
5. Enter a value for the Netmask - Netmask for the network ID.
6. Enter a value for the Router – This is the IP address of the router used to route
traffic to a specific network segment as specified by the Network ID and
Netmask.
7. Click Save.
To modify a Static Route:
1. From the left-side menu, click Administration > IP Address Settings.
2. Click the Network ID link. The Modify Static Route screen appears with the
current values.
3. Enter a value for the Network ID.
4. Enter a value for the Netmask.
5. Enter a value for the Router.
6. Click Save.
To delete a Static Route:
1. From the left-side menu, click Administration > IP Address Settings.
2. Select one or more static routes from the Static Routes table.
3. Click Delete.
An example of InterScan Gateway Security Appliance static routes settings for a
multiple segment network is given below. The example below also applies to single
segment networks.
13-15