Trend Micro InterScan Gateway Security Appliance M-Series ...

Trend Micro InterScan Gateway Security Appliance M-Series Administrator’s Guide
13-8
4. In the Control Manager Server Settings section, type the IP address or FQDN
(fully qualified domain name) in the FQDN or IP address field. (a required
field)
5. Type the port number to use in the Port field.
6. If the Web server that serves the Control Manager Web console requires
authentication, type the user name and password in the Web server authentication
section. Otherwise, leave this section blank.
7. If there is a proxy server between your appliance and the Control Manager server,
select the Use a proxy server for communication with the Control Manager
server check box in the Proxy Settings section. The Proxy protocol options
become editable.
a. Select the Proxy protocol to use.
b. Type the Server FQDN or IP address of the proxy server and the Port that
it uses.
c. If the proxy server uses authentication, type the User ID and Password.
8. If your InterScan Gateway Security Appliance resides behind an NAT (Network
Address Translation) device, select the Enable two-way communication port
forwarding check box. The IP address and Port fields become editable.
a. Type the IP address of your router or NAT server in the Port forwarding IP
address field.
b. Type the port to forward in the Port field.
Note: If the InterScan Gateway Security Appliance M-Series is behind an NAT
device, it can use the Port forwarding IP address and Port forwarding port
number for two-way communication with Control Manager. Otherwise, port
forwarding is not necessary.
9. Click Test Connection to verify that your appliance can connect to the Control
Manager server.
10. Click Register. A progress bar displays the progress of the registration process
and when registration is complete, the Control Manager Settings screen changes
appearance to reflect the registered status.