Installation & Operation Manual - StellarSupport - John Deere

Chapter 2
System Diagnostics
Enhanced diagnostic features are monitored by the control console during operation of the Sidekick Pro ISO
injection system to help identify potential issues and minimize equipment down time. Refer to Chapter 6,
Injection Diagnostics and Troubleshooting for more information on using diagnostics features on a specific
console.
Flow Monitoring
The CAN integrated Sidekick Pro ISO offers enhanced monitoring of pump operation during chemical injection
applications to alert the operator to conditions such as an empty chemical supply tank, low injection pressure,
incorrect meter calibration, or issues with the injection pump valves.
Sidekick Pro ISO Pump Specifications
The Sidekick Pro ISO injection pump is a positive displacement, variable speed piston pump used for direct
chemical injection applications.
Dimensions
Pistons
Maximum Stroke Length
Flow Output Range
Maximum Operating Pressure
Maximum Power Required
Maximum Recommended
Suction Lift
Inlet and Outlet Plumbing
Wetted Parts
Body Material
Wetted Seals/O-Rings
(See Figure 3 on page 7 or Figure 4 on page 8)
P/N 063-0173-402
5-200 oz./min.
[1.5-59 dl/min.]
1 @ 0.750” Dia.
0.390”
150 PSI
1/4 HP
P/N 063-0173-403
1-40 oz./min.
[0.3-11.8 dl/min.]
6 Sidekick Pro ISO Installation & Operation Manual
2 ft.
Mates with Banjo M100 Flange and 3/4” Female NPT
Polypropylene Stainless Steel
Polypropylene
V965-80 Viton and Graphite Filled Teflon