TELE-TECH & - AmericanRadioHistory.Com

psi`
QUICK, EASY
ASSEMBLY WITH
NEW
TYPE
THE
P
MOUNTING
TYPE B
MOUNTING
CINCH "50" EDGE CONNECTOR
.;
151
d
TYPE A
TYPE F
TYPE B
TYPE G
TYPE C
TYPE H
TYPE D
Eight different contact tail terminations
provide for use of A.M.P. "78" or
"98" solderless taper tab connections.
A standard solder slot is
also provided.
Contacts are made of phosphor
bronze and are available in a
variety of finishes.
TYPE R
MOUNTING
TYPE E
8 TYPES OF
CONTACT TAILS
... with the advantages of lower cost, contact
float, elimination of moisture traps and positive
connector operation over a wide range
of board tolerances.
Extended end guides provide positive
orientation of the printed card prior to
engagement with the connector.
Cinch. 50M Edge Connectors are available in
any number of contacts from one to 56. The
contacts are on standard 5/32" centers. A
polarizing guide may be assembled at
any contact position.
Laminated connector body materials are
available for either commercial or military
specifications. Connectors are
available with brackets for right
angle mounting or .136 diameter
mounting holes for rivet or screw
mounting.
CINCH will design, or redesign,
components to fit specific
needs, and will assist
in the assembly of compo-
nents through proven automation
technique.
Centrally located plants at
Chicago, Pasadena, Shelbyville
and St. Louis
Printed circuit board is
easily inserted into contacts
Patent Applied For
CONSULT CINCH
CINCH MANUFACTURING CORPORATION
1026 South Homan Ave., Chicago 24, Illinois
Subsidiary of United -Carr Fastener Corporation, Cambridge, Mass.
Tele -Tech & ELECTRONIC INDUSTRIES June 1956 For product information, use inquiry cord on pages 209 -210 113