TELE-TECH & - AmericanRadioHistory.Com

for the HIGHEST in RELIABILIT
prosucts are t e
most copied in the world. This is only natural, since
maintain the largest laboratories and engineering staff in our field. Howev
copying alone cannot provide the measure of uniformity and reliability inhere
in UTC units. To provide for the maximum in quality and reliability, continui
programs of quality control and quality improvement are constantly maintained
our laboratories.
WHAT MAKES A
TRANSFORMER
FAIL?
Illustrated area few views
of the UTC Reliability Lab-
oratory in action.., finding
the answers.
tative micro analysis.
Torque t
ut standard as
formity
of thermoplastic compounds.
of weld strength.
Chemical section analyz rg
new materials.
Calibrai
o primary standards.
":tel _
_lr_
Seal tests under extremes
of cold, heat, and altitude.
on magnet wire.
Corrosion testing
on insulating materials.
. i t -.!
Fiat plant run
on encapsulating material.
Nondestructive quality
control by x -ray.
IS THIS PROVEN
IN THE COMPONENTS OF
RELIABILITY AND UNIFORMITl
YOUR EQUIPMENT?
A large aircraft company... "Our vendor analysis for past year (thou
sands of tests) shows zero rejects."
A large electric company... "Consistent quality has placed you as oui
#1 source...are grateful for the aid you have given our own quality
control staff."
A large military electronics company... "Switching from former vendor
to UTC has saved us 18% of transformer and filter cost by reducing
manufacturing costs."
A large instrumentation company... "We haven't had one field failure
in fifteen years' use of UTC parts *."
'Over 100,000 units.
/ 1 5 0 V A R I C K STREET NEW YORK 13, N.
EXPORT DIVISION: 13 EAST 40th STREET, NEW YORK 16, N. Y.
CARLES: "ARL