Prisma II 1310 nm High Density Transmitter and Host Module ...
Prisma II 1310 nm High Density Transmitter and Host Module ...
Prisma II 1310 nm High Density Transmitter and Host Module ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 2 <strong>Module</strong> Installation<br />
<strong>Prisma</strong> <strong>II</strong> XD Chassis<br />
1 Attach a 75-ohm RF cable to the appropriate RF source.<br />
2 Locate the RF ports at the back of the chassis.<br />
3 Attach the other end of the RF cable to Port A connector (RF IN) of the<br />
corresponding slot where the module is to be installed. This is the RF input<br />
connection.<br />
4 If F-connectors are installed, use a 7/16-in. open-end wrench to secure both<br />
cables to the connectors at the chassis.<br />
18 78-4021716-01 Rev C
Change language