Prisma II 1310 nm High Density Transmitter and Host Module ...

Checking Module Alarms using the ICIM
Checking Module Alarms using the ICIM
To Check Alarms using ICIM
If the red ALARM LED on the front panel is blinking, a minor alarm condition is
indicated. If the ALARM LED on the front panel is illuminated, a critical alarm
conditions is indicated.
Alarms fall into one of the following categories.
Major low
Minor low
Minor high
Major high
1 From the MAIN menu, press the
2 Press the
SEL
key to highlight the Shelf and Slot fields.
key to address the Shelf number. Then press the
keys to scroll to the number of the desired shelf.
3 Press the ENTER key.
Result: The Slot field is highlighted.
4 Press the
key or the
5 Press the ENTER key.
Result: The MODULE menu displays on the ICIM.
6 Press the ALRM key.
Result: Module alarm conditions display.
key or the
key to Scroll to the number of the desired slot.
7 Use the key or the key to scroll through alarm conditions until the
desired alarm is displayed.
8 Monitor the alarm condition(s). Take appropriate action. Verify that all settings
and thresholds relating to the alarm indication are set correctly to rule out an
unintended alarm.
9 When finished, press the MAIN key to return to the MAIN menu.
78-4021716-01 Rev C 55