Prisma II 1310 nm High Density Transmitter and Host Module ...
Prisma II 1310 nm High Density Transmitter and Host Module ...
Prisma II 1310 nm High Density Transmitter and Host Module ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 2 <strong>Module</strong> Installation<br />
To Install the <strong>Host</strong> <strong>Module</strong> in the Chassis<br />
Note: This procedure assumes that the chassis is mounted in a rack.<br />
1 Locate the fiber guides at the bottom of the chassis <strong>and</strong> the module guide slots<br />
inside the chassis as shown in the following illustration.<br />
2 Align the ridges on the top <strong>and</strong> bottom of the host module with the guide slots<br />
on the chassis. Be careful to keep the host module level as you slide it into the<br />
chassis to avoid bending the pins on the back plane bus.<br />
3 Gently slide the host module into the chassis until you feel the connections on<br />
the back of the host module join connectors on the back plane bus.<br />
20 78-4021716-01 Rev C
Change language