Prisma II 1310 nm High Density Transmitter and Host Module ...

Chapter 3 Operation using ICIM
Checking Manufacturing Data using the ICIM
To Check Manufacturing Data
You can display the manufacturing data for this module on the ICIM LCD.
Complete the following steps to access the manufacturing data.
1 From the MAIN menu, press the
2 Press the
SEL
key to highlight the Shelf and Slot fields.
key to address the Shelf number. Then press the
key to scroll to the number of the desired shelf.
3 Press the ENTER key. The Slot field is highlighted.
key or the
4 Press the
key or the
key to scroll to the number of the desired slot.
5 Press the ENTER key. The MODULE menu for this module will be selected, as
shown on the left below. Press the
menus, as shown on the right below.
key to enter the start of the MFG. DATA
MODULE
Shelf 5
Slot 12
MFG. DATA
Shelf 5
Slot 12
HDTx
HDTx
Alarms
Mfg. Data
Module
Type
1022
TP425
Use the
and
keys to scroll through the manufacturing data.
58 78-4021716-01 Rev C