Prisma II 1310 nm High Density Transmitter and Host Module ...
Prisma II 1310 nm High Density Transmitter and Host Module ...
Prisma II 1310 nm High Density Transmitter and Host Module ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 3 Operation using ICIM<br />
Boot Dialog for ICIM/SNMP Configuration<br />
The boot dialog is presented whenever the ICIM is powered up (a cold boot). It is<br />
accessible via the LCI communications port on the front of the chassis.<br />
Important: A null modem is required along with a terminal emulator program, such<br />
as HyperTerminal on a Windows PC.<br />
The serial port on the PC used by the terminal emulator program should be set up<br />
with these parameters:<br />
9600 baud<br />
8 data bit<br />
No parity bit<br />
1 stop bit<br />
This parameter is often displayed as: 9600 8-N-1<br />
The boot dialog’s primary use is to flash a new version of the ICIM application via a<br />
TFTP server.<br />
Important: Do this only under the direction of Cisco Services.<br />
68 78-4021716-01 Rev C
Change language