Prisma II 1310 nm High Density Transmitter and Host Module ...
Prisma II 1310 nm High Density Transmitter and Host Module ...
Prisma II 1310 nm High Density Transmitter and Host Module ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Adjusting Alarm Thresholds<br />
Adjusting Alarm Thresholds<br />
To Adjust Alarm Thresholds<br />
Relative alarm thresholds are both displayed <strong>and</strong> stored as relative values. This<br />
method for adjusting alarm thresholds lets you choose any valid increment size <strong>and</strong><br />
adjust the alarm threshold to any valid value.<br />
You can use the ICIM to change the adjustable alarm thresholds of this module from<br />
their factory default values.<br />
1 At the MODULE menu, press the STAT key.<br />
Result: The STATUS menu appears on the ICIM LCD.<br />
2 Press the<br />
SEL<br />
key. The alarm thresholds previously set are displayed. If the<br />
label n/a is displayed, you cannot configure that alarm threshold. Press the<br />
key to highlight the alarm threshold for the next parameter.<br />
3 When the threshold that you wish to set is highlighted, press the ENTER key.<br />
4 Press the<br />
5 Press the<br />
<br />
<br />
key or the key to change the increment size.<br />
key or the<br />
Note: Press the Cancel ( ALRM<br />
6 Press the ENTER key to save the changes.<br />
Result: Data Saved displays.<br />
key to adjust the alarm threshold.<br />
) key to return to the previous menu.<br />
7 When finished, press the MAIN key to return to the MAIN menu.<br />
<br />
78-4021716-01 Rev C 71
Change language