Prisma II 1310 nm High Density Transmitter and Host Module ...
Prisma II 1310 nm High Density Transmitter and Host Module ...
Prisma II 1310 nm High Density Transmitter and Host Module ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 2 <strong>Module</strong> Installation<br />
To Connect Chassis-to-Chassis ICIM IN <strong>and</strong> ICIM OUT Ports<br />
1 Connect the serial extension cable from the ICIM OUT of the chassis containing<br />
the ICIM to the ICIM IN connector of the second chassis.<br />
2 Connect a serial extension cable from the ICIM OUT of the second chassis to the<br />
ICIM IN of the third chassis.<br />
3 Continue this “daisy-chain” connection until all chassis are connected.<br />
4 Connect an ICIM OUT terminator, part number 4013014, to the ICIM OUT<br />
connector on the last chassis in the daisy-chain connection. The ICIM OUT<br />
terminator ships with the ICIM.<br />
Important:<br />
All chassis connected in the daisy-chain must be powered <strong>and</strong> have a fan tray<br />
installed. A chassis connected in the daisy-chain that is not powered or has no<br />
fan tray installed will cause faulty operation of the ICIM.<br />
All chassis connected in this daisy-chain must have a unique chassis ID number.<br />
If the ICIM OUT terminator that ships with the ICIM is not installed on the last<br />
chassis of a daisy-chain connection, faulty communication with the ICIM may<br />
occur.<br />
28 78-4021716-01 Rev C
Change language