Learning by Doing: CISCO Certified Network ... - SCN Research

7. Click on Winpcap Auto-installer (driver + library) link (see figure 6). The file should
start the download process. Don’t forget where you put it. Execute this download
file before running Ethereal or you will get an error message.
Figure 5—Click on downloads.
Figure 6—Click on winpcap auto-installer.
8. Click on the back browser to get back to the ethereal download window (see fig. 4).
9. Scroll down and click on the “ethereal-setup-0.9.1.exe.” The file download process
should start.
10. To start a capture use “control+K” then select your NIC card. By default this thing
likes to use MAC as an interface (yeah…no icmp with MAC). Click “OK” at the
bottom of that window to start the capture.
Figure 7—Click on ethereal-setup.
121