Learning by Doing: CISCO Certified Network ... - SCN Research

Remember how we just put in a password? Yup…we use it only…no user name
required.
3. After putting in the password and clicking on “ok” you should see:
So how cool is that? You cannot tell from this picture but you can actually “see”
if a port is active…nice when you are not in front of the switch. You can click on
the port and view the statistics or even make changes.
4. But wait…there is more. You can also access the switch through the web
browser. Scroll down and click on Fast etherchannel management and there will
be a hyperlink for “telnet.” This will actually bring up a hyperterminal session to
the router. You will see this (next page):
249