Learning by Doing: CISCO Certified Network ... - SCN Research

Whole Enchilada/Crazy Insano Lab #1 (WECIL): Routing
Objectives:
To give you an idea of what a practical exam may be designed like to encompass all of
the objectives from this part.
Lab Design:
ISP
WWW
172.16.1.1/16
dhcp
Workstation “A”
Workstation “B”
You are the network administrator for a medium-sized manufacturing company in
Atlanta. They house all of their operations in three buildings on a city block. Each
building has a router and six switches. There is a connection from one building to the
ISP that is also used as a DHCP router/server. The ISP has assigned you to the
212.14.39.253/30. The ISP serial interface provides clocking and has an IP address of
212.14.39.254/30. Your task is to design an addressing scheme using private IP
addresses. You will need to implement a routing protocol that allows workstation A to be
able to ping to workstation B. As an extra measure of security you should not allow your
networks to advertise themselves outside of your network. Both workstations should
receive their IP address from the DHCP router/server. Since your equipment is limited
use a logical interface to emulate the other switches on each router. Both workstations
should be able to ping to every logical interface and to 172.16.1.1
Variants:
Class “A,” “B,” or “C” private IP addresses only.
Mixed “A,” “B,” or “C” private IP addresses.
Class “A,” “B,” or “C” public IP addresses only.
Mixed “A,” “B,” or “C” public IP addresses.
Mixed public and private addressing.
242