Learning by Doing: CISCO Certified Network ... - SCN Research

9. Use your knowledge of debug commands, both before and after implementing the
passive interface command, to verify it is working properly. Heck, even a show ip
route would work too.
10. Did you remember to statically connect your network to the ISP? Tsk, tsk.
ISP
RIPv2
RIPv2
RIPv1
Addressing:
Workstation “A” Workstation “B” Workstation “C”
Routers
Hostnames ISP RIPv1
E0 n/a 192.168.1.1/24
L0 172.16.1.1/16 n/a
S0 220.221.222.253/30(DCE) n/a
S1 n/a 161.20.6.2/24 (DTE)
So What Have I Learned Here?
In this lab you learned about RIP version 2. It does pass the subnet masks so we can use
that VLSM that we learned about a couple of labs ago…See, a place for everything and
everything in its place. Isn’t that nice? I think that will about do it for part 2. In the next
couple of parts you will learn about switching and then start picking up more routing
protocols now that you have mastered the basics of your router, RIP, and troubleshooting.
Guest Router Name Derivation
Phiber Optik was the leader of the Master’s of Deception (MoD) hackers ring in New
York City in the 1980’s/early 1990’s. Allegedly he master-minded the Martin Luther
King day crash of AT&T’s national phone service in 1990. Known for his daring actions
and media stunts he appeared or was interviewed in many publications including
Harper’s, Esquire, and the New York Times. Don’t worry…he got busted. Turk 182!
239