Learning by Doing: CISCO Certified Network ... - SCN Research

IPX Lab Diagram:
Network BB
enc HDLC
0000.1234.1111 0000.1234.2222
s0
s1 s0
e0
Network CC
enc HDLC
s1
network 100
enc SAP
e0
Network 200
enc SAP
Workstation “A”
Workstation “B”
5. Now let’s try to ping from our new router all the way through:
staticIPX#ping ipx bb.0000.1234.2222
Type escape sequence to abort.
Sending 5, 100-byte IPXcisco Echoes to BB.0000.1234.2222, timeout is 2
seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 64/64/65 ms
staticIPX#
That’s ok…we expected this…it is directly connected.
staticIPX#ping ipx bb.0000.1234.1111
Type escape sequence to abort.
Sending 5, 100-byte IPXcisco Echoes to BB.0000.1234.1111, timeout is 2
seconds:
.....
Success rate is 0 percent (0/5)
steve#
6. Next we need to add those static IPX routes in:
staticIPX(config)#ipx route BB CC.0000.1234.2222
steve(config)#ipx route CC BB.0000.1234.2222
Since gibson is directly connected to both we do not need any static routes
here…if we added more routers into our network then we would need more.
332