Learning by Doing: CISCO Certified Network ... - SCN Research

2. Then scroll down to the TCP/IP configuration for your NIC. On my computer I
picked this one (highlighted):
Figure 2—Finding the TCP/IP configuration for the NIC.
3. Double-click it or highlight it and select properties. You should see another pop
up window like this:
Figure 3—TCP/IP Properties pop up window.
4. Now, say we are told to put in an IP address of 192.168.1.3 with a subnet mask of
255.255.255.0 and a gateway of 192.168.1.1. Here is how we would do it. First
we would select “specify an IP address” and then put in IP address and mask on
this window. After doing that the window should look like this:
23