audio file in the INSERT mode - Fostex

More documents

Recommendations

Info

Cutting track data You can cut track data between the "SOURCE IN" and "SOURCE OUT" points. REC END Cut data REC END SOURCE IN point SOURCE OUT point Tips: By cutting a part of track data, the REC END point of the track moves backward. If timecode is recorded, it is automatically restriped by the continuous timecode. If only data on a single track of a STE- REO audio file is cut, the REC END point of the file does not changed. For example, if only data on track 2 is cut as illustrated on the right, the REC END point of the audio file does not changed because the REC END point of track 1 does not change. Track 1 Track 2 Track 1 Cut data REC END REC END Track 2 With a "Tape mode" audio file, all data of the specified track(s), from the beginning to the end, is cut. Therefore, you do not have to specify the "SOURCE IN" and "SOURCE OUT" points. You will need much time for cutting data of a "Tape mode" file compared with a "Normal mode" file. For example, to cut data of a "Tape mode" MULTI-track file, it takes about 58 minutes. 1. Store the "SOURCE IN" and "SOURCE OUT" points. See "Chapter 6: Storing time data" for details about how to store these points. 2. If necessary, trim these edit points using the preview function. See "Chapter 8: Preview function" for details about how to trim edit points. 3. While stopped, press the [AUDIO EDIT] key to show "Cut Clip?" (or "Cut?" when selecting a "Tape mode" audio file) on the display, followed by the [ENTER/YES] key. By pressing the [ENTER/YES] key, "Sel.Cut TRK?" appears on the display. Flashing Flashing Tips: You can select any one or more tracks to be cut available in the file. With a MONO file, only track 1 can be selected. 10-8
4. Press the appropriate edit point key(s) ([SOURCE IN], [SOURCE OUT], [DEST IN] or [DEST OUT] keys) to select the track(s) to be cut, and press the [ENTER/YES] key. * These edit point keys are used to select tracks 1 through 4 (TR 1 through TR 4), as labeled below the keys. Depending on the track mode of the audio file, the selectable tracks are restricted. By pressing the [ENTER/YES] key, "Cut Clip" (or "Cut" when selecting a "Tape mode" audio file) with flashing "Sure?" appears on the display. Flashing Flashing 5. Press the [ENTER/YES] key. The unit starts cutting track data between the "SOURCE IN" and "SOURCE OUT" points of the specified track(s). The display shows the required time together with the achieved percentage for cut. The time is counted down while the percentage is counted up as the cut operation is in progress. Also, the status is graphically shown by the track 1 level indicators which gradually light up from left to right. When all the data is cut, "Cut Completed!" is shown and the unit stops. REMAIN % H M S REMAIN H M S % Tips: When a "Tape mode" audio file is selected, "Cut!" appears. 1 BIT 24 FS 48 2 kHz ∞ 60 50 42 34 28 2018 12 8 6 5 4 3 2 1 0 OL -0.1% CLOCK -INT- FORMAT BWF 1 BIT 24 FS 48 2 kHz ∞ 60 50 42 34 28 2018 12 8 6 5 4 3 2 1 0 OL -0.1% CLOCK -INT- FORMAT BWF 6. Press the [EXIT/NO] or [STOP] key repeatedly to exit the AUDIO EDIT mode. Tips: If you are not satisfied with the result, you can undo the cut operation. Note that, however, you cannot undo the cut operation with a "Tape mode" audio file. Tips: The cut track data still remains in the clipboard after the cut operation is completed. While the cut data remains in the clipboard, you can paste or insert the data by executing "Clip Paste?" or "Clip Insert?" described earlier in this chapter. With a "Tape mode" audio file, the cut track data does not remain in the clipboard. Therefore, if you are going to perform the paste or "SOURCE PLAY" function, "Empty Clipboard!" appears and the operation is canceled. 10-9
Page 1 and 2:
KEYBOARD MOUSE SOURCE PLAY LOCATE A
Page 3 and 4:
Table of Contents Chapter-1 Before
Page 5 and 6:
Chapter-9 Audio file management Cre
Page 7 and 8:
Chapter-1 Before using the DV40 Bef
Page 9 and 10:
Setting the internal clock The inte
Page 11 and 12:
Formatting a DVD-RAM disk To make a
Page 13 and 14:
About audio files on a formatted di
Page 15 and 16:
Chapter-2 Names and Functions This
Page 17 and 18:
Front panel part 1 3 4 5 6 7 DVD MA
Page 19 and 20:
c. [PLAY] key Normally, pressing th
Page 21 and 22:
DISP TIME 15. [DISP TIME] key Cycle
Page 23 and 24:
CUE POINT IN DST OUT PREVIEW TR3 TR
Page 25 and 26:
NEW FILE INPUT MON 40. [AUDIO RDY -
Page 27 and 28:
50. [TC GEN MODE] switch Selects th
Page 29 and 30:
4. ETHERNET port ETHERNET 10/100 LI
Page 31 and 32:
Chapter 3 Reformatting/optimizing a
Page 33 and 34:
Tips: How to edit a volume name Whi
Page 35 and 36:
Optimizing a disk By optimizing a u
Page 37 and 38:
Chapter 4 Audio recording/playback
Page 39 and 40:
Recording an analog source in the N
Page 41 and 42:
Recording 1. Press the [RECORD] key
Page 43 and 44:
You can create an audio file before
Page 45 and 46:
Selecting a desired file on a disk
Page 47 and 48:
Creating a "Normal mode" audio file
Page 49 and 50:
KEYBOARD MOUSE SOURCE PLAY LOCATE A
Page 51 and 52:
MUTE recording You can make mute re
Page 53 and 54: Cueing by the jog function You can
Page 55 and 56: Chapter 5 Timecode recording This c
Page 57 and 58: ABS H M S F PGM Recording timecode
Page 59 and 60: TC Setup mode details The TC Setup
Page 61 and 62: • Selecting output timecode When
Page 63 and 64: • Catch offset you can capture th
Page 65 and 66: Chapter 6 Storing time data This ch
Page 67 and 68: Storing a time to an edit point mem
Page 69 and 70: Storing a time to a locate point me
Page 71 and 72: • Storing a time to a locate poin
Page 73 and 74: Clearing a CUE or MEMORY point memo
Page 75 and 76: Chapter 7 Locate functions This cha
Page 77 and 78: • Location to the last playback s
Page 79 and 80: • Location to a MEMORY point By s
Page 81 and 82: Chapter 8 Preview function This cha
Page 83 and 84: • Preview at a locate point You c
Page 85 and 86: Chapter 9 Audio file management Thi
Page 87 and 88: • Creating a new file on a disk j
Page 89 and 90: Editing an audio file name You can
Page 91 and 92: Restoring a deleted audio file You
Page 93 and 94: Converting the audio file format Yo
Page 95 and 96: Combining audio files You can combi
Page 97 and 98: Chapter 10 Editing track data This
Page 99 and 100: Tips: SOURCE-PLAY You can monitor t
Page 101 and 102: Flashing Tips: You can monitor the
Page 103: 5. Press the [ENTER/YES] key. The u
Page 107 and 108: Chapter 11 Setup mode In the Setup
Page 109 and 110: You can control the display contras
Page 111 and 112: Panel lock on/off You can select wh
Page 113 and 114: 4. After entering a desired name, p
Page 115 and 116: • Showing the router IP address 1
Page 117 and 118: Showing the main software version Y
Page 119 and 120: Chapter 12 Utility mode This chapte
Page 121 and 122: Selecting Rec Protect On or Off You
Page 123 and 124: Chapter 13 Importing an audio file
Page 125 and 126: 4. Select the desired directory ("b
Page 127 and 128: 9. Click on in the Spot Dialog wind
Page 129 and 130: Chapter 14 Specifications 14-1
Page 131 and 132: Pin 5:
Page 133 and 134: Declaration of EC Directive This eq
show all

audio file in the INSERT mode - Fostex

Create successful ePaper yourself

Delete template?

Save as template?