audio file in the INSERT mode - Fostex

TCP/IP settings
You can set parameters for the TCP/IP.
By selecting the "TCP/IP Setup?" menu and pressing
the [ENTER/YES] keys, the IP address setting submenu
is shown.
SETUP
Flashing
• Showing the IP address
1. Select "IP Addr.?" and press the [SKIP/CURSOR]
>>| key.
The current IP address is shown (the default is
192. 168. 1 .64).
Pressing the [||] key alternates the following
screens.
SETUP
Flashing
SETUP
SETUP
Flashing
You can now use the jog dial to select a sub-menu from
the following.
IP address setting
• Setting the IP address
1. While either of the screen above is shown, press
the [ENTER/YES] key.
The leftmost three-digit value of the current IP address
starts flashing, showing that you can now edit it.
SETUP
Router IP address setting
Subnet mask setting
Flashing
2. Use the [||] keys to move the flashing
(editing) point and use the jog dial or numeric keys
to enter a desired value.
Log-in name and password settings
Administrator name and password
User name and password (01 through 15)
MAC address (display only)
3. After entering the desired value, press the
[ENTER/YES] key.
"Wait!" flashes for a while, and the new IP address is
set.
4. To exit the Setup mode, press the [EXIT/NO] key
or [STOP] key.
The following description assumes that each sub-menu
is already selected.
11-8