audio file in the INSERT mode - Fostex

A variety of locate functions
The following locate functions are available.
1. Location to the beginning (ABS0) of the current audio file
2. Location to the end (REC END) of the current audio file
3. Location to the last playback start position
4. Location to the last recording start position
5. Location to the last recording end position
6. Location to the point where the recorder located last time
7. Location to an audio edit point
8. Location to a CUE point
9. Location to a MEMORY point
10. Location to the next or previous CUE/MEMORY point using the skip mode
• Location to the beginning (ABS0) of an audio file
Regardless of the current position, you can locate to the beginning (ABS0) of the current
audio file.
1. When the recorder is stopped, press the [REWIND] key while holding down the [STOP] key.
The recorder locates to the beginning (ABS0) of the current audio file and the display shows ABS 00H:
00M: 00S: 00F".
RECORD
STOP
PLAY
REWIND
F FWD
SOURCE PLAY
LOCATE ABS 0
LOCATE REC END
• Location to the end (REC END) of the current audio file
Regardless of the current position, you can locate to the end (REC END) of the current audio
file.
1. When the recorder is stopped, press the [E FWD] key while holding down the [STOP] key.
The recorder locates to the end (REC END) of the current audio file and the display shows the appropri
ate time.
RECORD
STOP
PLAY
REWIND
F FWD
SOURCE PLAY
LOCATE ABS 0
LOCATE REC END
• With a "Tape mode" audio file, the recorder locates to the end of the audio file. It is equivalent to
winding an analog tape to the end. Therefore, regardless of whether recording is made or not, you
can check the maximum recording time of the "Tape mode" audio file.
• To locate to the record end point of a "Tape mode" audio file, use the locate function using the
[MEMORY] key described later.
7-2