audio file in the INSERT mode - Fostex

Selecting Rec Protect On or Off
You can protect a file from being recorded or
edited.
This setting is dependent on files and is maintained
after you turn off the power.
1. Select the first level of the "Rec Protect?" menu, and
press the [ENTER/YES] key.
The current option (On or Off) flashes. You can now
select the desired one.
Renumbering CUE points
This menu allows renumbering CUE points.
When CUE points are renumbered, CUE points
are numbered in order of time.
This function is useful after deleting a CUE point
or the current CUE points are not stored in order
of time.
You can renumber CUE points of the currently
selected file.
Flashing
1. Select the first level of the "CUE Renumber?" menu,
and press the [ENTER/YES] key.
"Sure?" flashes.
Flashing
Flashing
2. Use the jog dial to select On or Off and press the
[ENTER/YES] key.
The setting is completed and the display returns to
show the first level.
“On”
“Off” (default)
The current file is protected. You
cannot make recording or edit
(copy, paste, insert, erase and cut)
track data.
You can make recording or edit
track data.
Tips:
You can also use the [SKIP/CURSOR] || keys
to select an option, instead of the jog dial.
Flashing
2. Press the [ENTER/YES] key again.
The unit starts renumbering CUE points.
While executing renumbering, "Please Wait!" is shown.
When completed, "RNM Completed!" appears
momentarily and the display returns to the previous
screen before entering the Utility mode.
3. Press the [EXIT/NO] or [STOP] key to exit the Utility
mode.
Tips:
When the Rec Protect menu is set to On, if you
try to make recording or edit track data, "Rec
Protected!" is shown and the operation is ignored.
12-3