audio file in the INSERT mode - Fostex

• Preview at a locate point
You can preview audio faded in from a desired locate point (selected from among CUE
points 01 through 99 and MEMORY point 01 through 99).
The following procedure is assumed that the locate point you want to preview is stored.
You cannot preview a locate point (CUE or MEMORY point) with a "Tape mode" audio file.
1. Press the [CUE POINT] or [MEMORY] key.
The display shows a locate point with flashing point number.
Screen example when pressing the [CUE POINT] key.
ABS
MEMORY
1
2
H M S F SF
∞ 60 50 42 34 28 2018 12 8 6 5 4 3 2 1 0 OL
BIT
FS
kHz
-0.1%
FORMAT
BWF
48
24
Flashing
Screen example when pressing the [MEMORY] key.
Flashing
2. Use the jog dial to select a desired point number you want to preview.
3. Press the [SHIFT] key to turn on the indicator and press the [CUE POINT] or [MEMORY] key
again.
The display shows something like below and the unit performs the fade-in preview at the selected
point. During preview, the level meter indicators runs from left to right.
CLOCK
-INT-
H M S F SF
ABS
MEMORY
1
BIT 24
FS 48
2
kHz
∞ 60 50 42 34 28 2018 12 8 6 5 4 3 2 1 0 OL -0.1% CLOCK
-INT-
FORMAT
BWF
H M S F SF
MEMORY
1
BIT 24
FS 48
2
kHz
∞ 60 50 42 34 28 2018 12 8 6 5 4 3 2 1 0 OL
CLOCK
-INT-
3
FORMAT
BWF
4
H M S F SF
ABS
MEMORY
1
BIT 24
FS 48
2
kHz
∞ 60 50 42 34 28 2018 12 8 6 5 4 3 2 1 0 OL -0.1% CLOCK
-INT-
FORMAT
BWF
4. To stop preview, press the [STOP] (or [EXIT/NO]) key.
The preview function is canceled and the display returns to the previous screen.
8-3