audio file in the INSERT mode - Fostex

Clearing a CUE or MEMORY point memory
You can clear an unnecessary locate point memory (CUE or MEMORY).
1. While stopped, press a desired locate point key ([CUE POINT] or [MEMORY] key).
The display shows the locate bank and memory number (e.g. "Cue 03"), and a locate point time with
flashing memory number.
The following is a display example when pressing the [CUE POINT] key.
Flashing
CUE
ABS
H M S F SF
1
2
BIT
FS
kHz
∞ 60 50 42 34 28 2018 12 8 6 5 4 3 2 1 0 OL -0.1%
FORMAT
BWF
48
24
2. Use the jog dial (or the numeric keys) to select a locate point memory you want to clear, and press a
desired locate point key ([CUE POINT] or [MEMORY] key) three times.
"CUE Delete" is shown with flashing "Sure?".
Flashing
CUE
ABS
H M S F SF
1
2
BIT
FS
kHz
∞ 60 50 42 34 28 2018 12 8 6 5 4 3 2 1 0 OL -0.1%
FORMAT
BWF
48
24
CLOCK
-INT-
CLOCK
-INT-
3. Press the [ENTER/YES] key.
The selected locate point memory is cleared and the display returns to the Normal screen.
Tips:
After a memory is cleared, "--H--M--S--F--SF" (showing that the memory is vacant) is shown on the
display.
When locate point memory numbers are not continuous after some are cleared, or when memories are
not numbered in order of ABS time, you can renumber them continuously in order of ABS time.
6-9