Omega-Voice VMI Technical Manual (5th Edition) (PN 500175)

Chapter 1
IX-4EVMC
DHCP
When the IX-4EVMC uses DHCP addressing, you only need to connect the Ethernet port from the
card to the LAN. When the IX-4EVMC is started or reset, it will request an IP address from your
DHCP server. To determine the assigned IP:
1. Access the system administrator’s mailbox by dialing the pilot number for your hunt group and
pressing #.
2. When the system asks you to enter your mailbox number, enter 201 (default administrator’s box.
This is programmable).
3. If the tutorial starts playing, bypass it by pressing 9.
4. Press 4 for the System Management Menu.
5. Press 0 and the assigned IP address will play back.
Once the IP address is determined, you can now connect to the IX-4EVMC using an IP connection. To
establish an IP connection, do the following:
1. Select the Edit Customer Profile icon.
2. Select the Network option in the Connection group.
3. Enter the Network Administrator Supplied IP address or the IP address obtained from the DHCP
server.
4. Select the UDP (EVMC) option.
5. Select the OK button.
11