Omega-Voice VMI Technical Manual (5th Edition) (PN 500175)

Omega-Voice VMI Technical Manual
Backup and Restore
The IX-4SEVMC does not have a compact flash module (CFM) that stores backup data. Backup voice
mail data is stored on a PC connected to the IX-4SEVMC card. The backup and restore procedure is
for programming and mailbox information. Customer data: Mailbox names, greetings, and voicemail
messages are not backed-up.
This process outlined below requires the IX-4SEVMC to be taken offline. For this reason, backups
should be done during non-peak calling hours.
On-Demand Backup
The following procedure explains the process for backing up data to a PC.
1. Establish a connection to the IX-4SEVMC card using the VMI System Editor.
2. From the menu bar, select the On Line > Backup > Configuration to PC.
The Omega-Voice VMI system is then taken offline and reboots the card. The terminal window
displays the progress of the restart. When the restart is complete, the IX-4SEVMC is ready for service,
and you can close the terminal window.
On-Demand Restore
The following procedure explains the process for restoring the customer data from a PC.
1. Establish a connection to the IX-4SEVMC card using the VMI System Editor.
2. From the menu bar, select the On Line > Restore > Configuration from PC.
The Omega-Voice VMI system is then taken offline and reboots the card. The terminal window
displays the progress of the restart. When the restart is complete, the IX-4SEVMC is ready for service,
and you can close the terminal window.
38