Omega-Voice VMI Technical Manual (5th Edition) (PN 500175)

Chapter 1
IX-4EVMC
IX-4EVMC Installation in an Existing ECS
Follow these instructions only if you are installing the Omega-Voice VMI IX-4EVMC into an existing
telephone system.
1. Put the IX-4EVMC card in Make Busy mode.
2. Insert the card into the appropriate slot in the cabinet.
3. Take the car out of make busy mode.
4. Wait for the card to come up from the make busy condition.
5. Launch the Iwatsu Programmer.
6. Use the Iwatsu Programmer to connect to the system.
7. Go to System >> Hardware.
8. Select the card location of the IX-4EVMC from the telephone system graphic.
Menu Location
Card Configuration
Voicemail Configuration
Card Location
9. Under the Ports screen, define all eight ports as Message Station.
10. Under the Ports screen, configure the function of all eight ports as VML.
11. Upload the configuration changes and wait 10 seconds.
12. Save the database to a secure location.
13. Proceed to Database Programming for an IX-4EVMC instructions on page 7.
5