0 Contents - Hilti Svenska AB

Application requirements
Thickness of base material
hmin
70
Concrete
hmin = 80 mm
dnom
Thickness of fastened material
tI ≤ 50.0 mm (for collated nails)
tI ≤ 95.0 mm (for single nails)
Spacing and edge distances
Distance to edge of concrete
/ sand lime masonry:
70
Spacing along track (per U. S. Gypsum
Handbook)
160-800
Steel
tll ≥ 4 mm
tII
X-DNI
Fastener spacings on wood: Distance to edge of steel:
Corrosion information
The intended usefor safety relevant and permanent applications only comprises fastenings
which are not directly exposed to external weather conditions or moist atmospheres. For further
detailed information on corrosion see corresponding chapter in section Direct Fastening
Technology.
11 / 2007 4.103
40
100
80
22
80
80
40
15
At track ends (cut-outs for doors), secure
with two nails
80
40