0 Contents - Hilti Svenska AB

X-CR
Spacing and edge distances (mm)
Pairs Row along edge General
(e.g. group of fasteners)
200
c
c 50 200
reinforced* non-reinforced
c 100 150
Fastener spacing on wood:
160-800
50
100
c
c
200 200 200
reinforced* non-reinforced
c 80 150
* Minimum ∅ 6 mm reinforcing steel continuous along all edges and
around all corners. Edge bar must be enclosed by stirrups.
22
80
Corrosion information
For fastening exposed to weather or other corrosive conditions. Not for use in highly corrosive
surrounding like swimming pools or highway tunnels.
For further detailed information on corrosion see corresponding chapter in section Direct
Fastening Technology.
Recommended setting range
Concrete
No general restrictions existent. Limitations
are depending on application and user
requirements.
Steel
4.118 11 / 2007
Shank length, LS [mm]
59
54
49
44
39
34
29
5
a
c
c
reinforced* non-reinforced
c 80 150
a
a 80 100
6 7 8 9 10 11
Steel thickness, tII [mm]
Working beyond the recommended application range will lead to an increase of the failure rate.