0 Contents - Hilti Svenska AB
0 Contents - Hilti Svenska AB
0 Contents - Hilti Svenska AB
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
X-FCM<br />
Cartridge selection and tool energy setting<br />
X-BT<br />
6.8/11M high precision cartridges<br />
Tool energy adjustment by setting tests on site.<br />
Material specification and coatings<br />
X-CRM and X-EM8<br />
6.8/11M red cartridges with DX 460<br />
6.8/18M red cartridges with DX 76<br />
X-FCM system<br />
X-FCM-R X-FCM-M X-FCM All systems<br />
➀ ➁ ➀ ➁ ➀ ➁ ➂<br />
Disk Threaded stem Disk Threaded stem Disk Threaded stem Absorber 1 )<br />
Material X2CrNiMo18143 X2CrNiMo18143 ST1403 11SMNPB30+C ST1403 11SMNPB30+C Polyurethane<br />
designation X6CrNiMoTi17122 Black<br />
X5CrNiMo17122K700<br />
Coating none none ≥ 65µm Zn Duplex * ≥ 20µm Zn 10–20 µm Zn –<br />
1 ) resistant to: UV, saltwater ozone, oil, grease<br />
*) 480 h Salt spray test per DIN 50021 and 10 cycles Kesternich test per DIN 50018/2.0 (comparable to 45 µm<br />
HDG steel)<br />
Threaded studs<br />
X-BT and CRM8 EM8 X-CRM X-BT<br />
➀ ➁ ➂ ➃ ➂ ➃<br />
Part X-BT/X-CR shank Threaded sleeve EM8 Sealing washer 1 ) SN12-R washer Sealing washer 1 )<br />
Material Stainless steel X2CrNiMo17132 Carbon steel wire, Polyethylene, X2CrNiMo17132 Elastomer, black<br />
designation wire, CR 500 X5CrNiMo17122+2H Ck 67 MOD LD, black X5CrNiMo17122+2H<br />
(A4 / AlSl316) (A4 / AlSl316) (A4 / AlSl316)<br />
Coating none none 5–13 µm Zn 2 ) none<br />
1 ) resistant to: UV, saltwater ozone, oil, grease<br />
2 ) Zinc applied by electroplating. Intended for corrosion protection during shipment, storage, construction and<br />
service in protected environment. It is not adequate for protection against corrosion in outside or otherwise<br />
corrosive applications<br />
4.64 11 / 2007
Change language