0 Contents - Hilti Svenska AB

X-CRM
Fastener selection
Fastened thickness Fastener Tools
tI,max [mm] Designation 1 ) Item no. Lg [mm] Ls [mm]
Base material steel
4.5 X-CR M6-11-12 FP8 255902 9 11.5 DX 460, DX 36
15.5 X-CR M6-22-12 FP8 255903 20 11.5 DX 460, DX 36
4.5 X-CR W6-11-12 FP8 255904 9 11.5 DX 460, DX 36
15.5 X-CR W6-22-12 FP8 255905 20 11.5 DX 460, DX 36
Base material concrete
4.5 X-CR M6-11-27 FP8 257187 9 26.5 DX 460, DX 36
15.5 X-CR M6-22-27 FP8 257188 20 26.5 DX 460, DX 36
4.5 X-CR W6-11-27 FP8 255906 9 26.5 DX 460, DX 36
15.5 X-CR W6-22-27 FP8 255907 20 26.5 DX 460, DX 36
Base material steel
2.0 X-CR M8-11-12 P8 255908 10 11.5 DX 460, DX 36
13.0 X-CR M8-22-12 P8 255909 21 11.5 DX 460, DX 36
Base material concrete, DX-Kwik method
5.0 X-CR M8-14-42 P8 255911 14 42 DX 460, DX 36
13.0 X-CR M8-22-42 P8 255910 22 42 DX 460, DX 36
Base material steel
for X-FCP X-CR M8-9-12 P8 372031 9 12.5 DX 460
6.0 X-CR M8-15-12 P8 372033 15 12.5 DX 460
for X-FCP X-CR M8-9-12 FP10 372032 9 12.5 DX 460, DX 76
6.0 X-CR M8-15-12 FP10 372 034 15 12.5 DX 460, DX 76
1 ) Type threading: M = metric; W6 = Whitworth 1/4”
Cartridge selection and tool energy setting
Base material Designation Tool
Concrete 6.8/11M yellow or red cartridge DX 460, DX 36
Steel 6.8/11M red cartridge DX 460, DX 76
Tool energy adjustment by setting tests on site.
4.162 11 / 2007